Pair (2 Pieces, Left + Right) of Rear Tail Lights Assembly Upgrade Kit(with Mounting screws, bolts and nuts included) Fit following vehicles: Replacement for 1976-1983 CJ5 tail lights lamps assembly; Replacement for 1976-1986 CJ7 tail lights lamps assembly; Replacement for 1981-1985 CJ8 tail lights lamps assembly; Replacement for 1987-1995 Wrangler YJ tail lights lamps assembly; Replacement for 1997-2006 Wrangler TJ tail lights lamps assembly; Features: -- Color: Smoke Lens -- Dimension: 6.75" x 5.75" x 2.35" -- Rear Square Led Combination Stop Turn Tail Light Stud Mount Lights are impact resistant and less susceptible to shock damage; Each LED is directly wired and water-tight sealed. -- Each one is equiped with 46 Super bright LEDs: 16 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights, 3 red led as side marker lights, and 6 White LED as License Plate illuminator(left side) -- Replacement part number: Left Side: 56018649, 56018649AD, 56016721, CH2800120, CH2800161; Right Side: 56018648, 56018648AD, 56016720, CH2801120, CH2801161 Installation: The red lens is removable. Mounting Bolts and Nuts are included for complete mounting; These rear combination tail lights are bolt in replacement tail lights and bolt directly in place of your stock led tail lamps. You may need to cut off the stock tail lamp pigtail and spliced onto the new assembly with included hardware. Note:the distance between the mounting blots is about 2"~2.2"; Package include: 2x Smoked Red/White LED Stud Mount Combination Stop/Turn/Tail Lights side marker lights Both the driver and passenger side rear truck tail lights has side marker lights integrated; license plate lights The drivers side rear square taillight illuminate the license plate below(clear portion on the bottom for the tag); rear combination tail lights lamps Inatalltion Steps: 1. Before you begin installation, Disconnect the power and put on safety glasses. remove 4 screws; 2. Remove tail light lens; 3. Remove the 3 socket headed screws that attach the taillight to the body of your truck using an about 3/8” socket; 4. Gently pull the light housing away from the body; 5. Unplug the taillight harness from your vehicle wiring harness. You may need to cut off the stock tail lamp pigtail and spliced onto the new assembly with included hardware. Once determined, wire your new LED tail light and Repeat steps 1 through 4 for the opposite side;