Motion Sensor Mode Auto Light Up When Movement is Detected in the Dark Condition How To Use It ? 1. Switch “AUTO”: It will light up when detects movement during dark condition, and will auto-off after 20s if no motion detected. (AUTO Mode Only Auto Light Up When Movement is Detected in the Dark Enough Condition) 2. Switch “ON” : In this mode, the light will turn on all the time. The functions of lights can be controlled by the remote control. 3. Switch “OFF”: The light will turn off. Remote Control Functions--(The remote control can not be used for this mode.) 1. ON/OFF: Wireless remote operation to turn ON or OFF the light. 2. Button + / - : To Adjust brightness as you needs. 3. Preset Brightness:10%,40%,80%,100% brightness. 4. Timing Function: Auto-off after 10/30/60/120 mins. Note: 1. Please charge the product before the first use. 2. Remove the plastic spacer before using the remote control. 3. Before using the adhesives, please wipe the area where you must paste them to avoid dust, water, etc., otherwise the bonding strength will be affected. 4. The remote control does not work for "Auto" mode, only "ON Mode". 5. Motion sensor ( "Auto" Mode) will auto light up when movement is detected in a dark enough condition. 6. Don't charge for a long time (prohibit more than 12 hours), Excessive charging time will affect the battery life, prohibit using while charging all time. 7. Please place the products away from fire or high-temperature places. Children should use this product under the guidance of adults. 8. Any problems please feel free to communicate with us, we are striving to provide good products and a happy shopping experience for every customer, and we will try our best to provide a satisfied solution!